1.Set the Initial Time: Open the back cover and remove the batteries(if any), turn the minute hand (the larger hand) clockwise to position the hands at 12:30.

2.Insert Batteries:Insert the batteries one at a time, ensuring they are fully seated while paying attention to the plus and minus terminals.

3.Adjust to 1:00: Turn the minute hand(Long Hand) clockwise to set the time to 1:00. The cuckoo should come out once and then return inside.

4.Fine-Tune the Time: Continue turning the hands clockwise, stopping at each hour to allow the cuckoo to come out and return inside until you reach the exact time.

Step 1: Insert Batteries & Set the Time

• Put the batteries in, making sure the "+" and "–" sides match correctly.
  
• Set the time by turning only the minute hand (the long hand) clockwise.
  
• Do not move the hour hand.
  

Step 2: Hang the Clock

1. Mount the Clock: Hang the cuckoo clock on a wall in a bright area.
   
2. Attach the Pendulum: Insert the pendulum into the loop at the bottom and give it a gentle push to start it swinging.
   
3. Attach the Weights: Hang the weights on their proper hooks.
   

Side Cabinet Features

• Light Sensor: Turns off the cuckoo and music automatically in the dark.
  
• Sound Control Switch:
  -Cuckoo & Music On
  -Music Off
  -Cuckoo & Music Off

• Cuckoo Volume Control
  

Important Notes

• Only turn the minute hand to set the time—never the hour hand.
  
• Make sure batteries are inserted correctly.
  
• Battery Replacement:
  -Replace every 1–1.5 years.
  -Use only Original German Varta batteries.
  -Do not use rechargeable batteries.
  
• If the clock runs slow or the cuckoo doesn't move properly, the batteries may need replacement.